Our Lenox Solid Plastic Locker with a Mesh Front Door is a durable, attractive locker made to last decades. These lockers are made from 100% high density plastic or polyethylene (HDPE) and 30% of the total is post-industrial recycled HDPE plastic. They feature an “all-welded” construction that is tough and vandal resistant. The materials and the quality construction form a locker that is backed by a twenty year warranty against breakage, rust, and delamination under normal use. Normal use is defined as lockers installed in a climate-controlled environment and not subject to direct sunlight.
The Lenox Solid Plastic Locker with a Mesh Front Door has numerous advantages over traditional lockers made of metal or wood. First, the HDPE plastic will not corrode and is impervious to water, humidity, saltwater, or the chlorine from swimming pools. The lockers can be considered “corrosion-proof.” Second, the color of the HDPE extends throughout the material. Therefore, the locker never needs to be painted. Third, they are highly impact resistant with doors and frames that are 1/2 inch thick. Fourth, their all-welded construction makes them rigid for life and eliminates the need for fasteners. Fifth, unlike metal lockers, they don’t rust, scratch, dent, or come apart. And finally, these lockers have a mesh front door which allows for maximum ventilation.
Our Lenox Solid Plastic Locker with a Mesh Front Door is available in a variety of attractive colors. These colors include beige, black, burgundy, charcoal gray, deep blue, desert stone, dove stone, grey, red, teal and white. Recently, the 100% post consumer recycled HDPE lockers became available in the colors of moss, beige, toffee, and charcoal gray. The interiors of the lockers are white for visibility and ease of cleaning. In addition, the locker doors can be customized in a variety ways with logos, monograms, or lettering.
The Lenox Solid Plastic Locker with a Mesh Front Door is available in various sizes. The standard locker height is sixty or seventy-two inches. In a locker configuration of seventy-two inches there can be as many as six tiers or doors. In that case, each door would be twelve inches in height. Other configurations can be five, four, three, two, or one tier (door). If the configuration has only one tier then the single locker would be seventy-two inches in height. The standard width and depth can be twelve, fifteen, or eighteen inches. The locker doors are designed to accept various types of locks. The standard door will have a stainless steel hasp for use with padlocks. Other lock options include key locks, built-in combination locks, and coin operated locks. And the latest lock option is a pocket lock or portable security lock for shared locker venues.
The Lenox Solid Plastic Lockers with a Mesh Front Door are shipped fully assembled. The installation involves attaching the lockers to the walls and to each other. The locker base will rest on the floor. The lockers are ADA compliant with ergonomically designed handles that require less than five pounds of force to operate. In sum, these lockers are attractive and durable and are virtually maintenance free. They are offered in a wide range of sizes, tiers (door sizes), colors, and options. They will compliment any location and will last for many decades.
XPB Lockers carries a wide variety commercial industrial sinks, commercial mailboxes, commercial outdoor furniture, bleachers, and commercial signage delivered nationwide. If you can not find what you are looking for call us toll free at 1-877-483-9270 and we will find it for you. Our home office is located in New Braunfels, Texas with warehouses located throughout the United States that enable us to service all 50 states including New Orleans, La., Cleveland, Ohio, Kansas City, Mo., Mesa, Arizona, Virginia Beach, Va., Omaha, Nebraska, Oakland, California, Miami, Florida, Tulsa, Oklahoma, Minneapolis, Minnesota, Colorado Springs, Colorado, Houston, TX, Arlington, Texas, Beaumont, Texas, Denton, TX, McKinney, Texas, Midland, TX, Killeen, Texas, ALBQ, NYC, LA, MPLS.
|