The Cubby Bench, also know as the Lennoxcubbybench, is a
tough, solid, plastic bench that is sold with a twenty year warranty against
rust, delamination, or breakage under normal use. It has become extremely
popular in spas, gyms, schools and other locations that desire its low
maintenance benefits. It is available in twelve attractive colors that include
gray, beige, desert stone, dove stone, starry night, moss, toffee, buttermilk,
charcoal gray, burgundy, black, and deep blue.
There are
numerous advantages associated with the non-traditional solid plastic Cubby
Bench. First, it is more environmentally friendly because it is made from
thirty percent pre-consumer recycled HDPE plastic. Second, the plastic is very
low maintenance and never needs painting because the color permeates the plastic
throughout (homogeneous). Third, these benches will resist dents and scratches.
Fourth, these durable benches utilize an all-welded construction method and are
therefore able to withstand most acts of vandalism. Fifth, these benches are one
hundred percent plastic and therefore impervious to moisture. They will never rust or delaminate like
other traditional benches.
The Cubby Bench
derives its name from the fact that there are several “cubby holes” or open
storage areas beneath the bench seat. These “cubby holes” are one of the most
desired features of this bench because they offer open and temporary storage
with ease. The sides, box and dividers are cut from a sheet of three-eighths
inch thick HDPE plastic. A matte texture is selected as the finish type and the
sides, box, and dividers are welded to the one inch thick bench top to form a
complete unit. There are no metal
fasteners or dovetail joints. Benches can be ordered in four standard lengths of
thirty-six, forty-eight, sixty, or seventy-two inches. The depth of the bench is eleven and
one-half inches and the height is twenty inches. Each cubby hole is
approximately ten inches wide and eleven and one-half inches deep. Of course,
since the bench is a single unit, it is shipped fully assembled.
The installation
of the Cubby
Bench is very simple and straightforward. It is strongly suggested that the
benches be installed in a climate controlled environment and away from any
direct sunlight. Direct sunlight will fade the color and shorten the life of the
bench. It is recommended that the benches be anchored to the wall or floor to
prevent any personal injury from “tipping over” of the benches. The installer
should clean and smooth all floors and walls and remove any protruding nails or
other objects. The benches should be level and floor-supported or they will not
serve the user properly. If leveling is required then shims should be used. The
installer should drill approximately two holes per “cubby hole” to anchor the
benches securely. If the benches are to be floor mounted then the installer
would drill the holes in the bottom panel.
If the benches are to be mounted against the wall, then holes should be
drilled in the back panel.
XPB
Lockers & Supply carries a wide variety of Commercial
Lavatories, Commercial
Outdoor Furnishings, Storage
Lockers, Bleachers,
Commercial
Mailboxes and deliver nationwide. If you can not find what you are
looking for call us toll free at 1-877-483-9270 and
we will find it for you. Our home office is located in New Braunfels, Texas
with distributors located in all 50 States including Houston, TX, New York
NY, Los Angeles CA, Miami, FL. Chicago, IL. Denver CO., Dallas TX, San Antonio,
TX., and Austin, TX.
|